sludge dehydrator machine

    Multi-Disk Screw Press sludge dehydrator machine( Hereinafter referred as MDS ) belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. MDS using screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter press like belt press and frame press, the screw speed is very low, so it cost low power and water consumption in contrast to the centrifuge, it is a cutting edge sludge dewatering machine.

  The initial section of dewatering drum is the Thickening Zone,Where the solid-liquid separating process takes place adn where the filtrate will also be discharged. The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum,hence increasing its internal pressure. At the end, the End plate further increases the pressure, so as to discharge dry sludge cake.

1)   Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l

2)  Fixed and moving rings replace filter cloth, lelf-cleaning , clog-free, easy to handle oily sludge

3)  Low running speed, low noise ,low power consumption, 1/8 of Belt press and 1/20 of Centrifuge

4)  Less capital construction cost, more excellent working performance

5)  Fully automatic control, easy operation and simple maintenance

     Advantages over other sludge dewatering machine

  MDS-311 Applied for pharmacy wastewater treatment    

      Inlet sludge Water Content:0.5%-5%    Discharge Sludge Cakes Water Content:75%-85% 

 Q: Are you trading company or manufacturer ?

 A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Q: How to select a suitable industrial dewatering equipment?
1. What is the sludge type? 
2. What is the voltage? 
3. what is your sludge treatment capacity per hour(m³/hour)?
4. What is the character of the your sludge? 
5. How about the existing sludge treatment equipment you are using?
6. What is your sludge solid content or moisture content(%)?

Q:Why Choose Lifeng?

1. lifeng has over 4 decades experience in sludge dewatering and sludge treatment.
2. We have Dr. experts for quality control, thus our product is far better than other Chinese manufacturers.
3. We only use the best parts from best suppliers, such as Bauer, SEW, Schneider, Omron, etc.
4. We have our own RD center and complete manufacture system.
5. We have got CE mark and ISO 9001 certificates, rich experience in dealing with overseas markets.